Yalipan Wood Texture Lap Siding
YALIPAN is a system for exterior wall cladding that consists of water resistant cement fiber boards. It is highly effective when used with heat insulation material. The system immitates wood.
Yalipan wood texture Cementboard Application Areas:
- Facade siding of buildings;
- For cladding party walls;
- For cladding retaining walls;
- In general purpose buildings and facilities like stadiums, shopping malls and business centers;
- For decorative purposes in interior spaces
- For cladding chimneys and parapets;
|
YALIPAN Classic
|
YALIPA Lambali
|
 |
 |
 |
 |
|
YALIPAN Classic
|
YALIPA Lambali
|
Yalipan wood texture Cementboard Installation
The system could be installed in two ways:
- direct way, over an existing wall by using PVC screw pin fastener 8/120mm
- over a main metal or wooden subconstruction, leveled and fixed by hangers to the existing wall. The hollow that is formed in this case could be filled with heat insulation wool RIVATHERM. The air gap between the insulation and the external facing must be suitably sized to guarantee good air circulation and, above all, to set up the „chimney effect“ (upward draught of warm air). It is usually between 30 and 80 mm thick. The functionality of this gap depends on its internal air circulation conditions, so it should be kept free of any impediments that might limit the fl ow (bottlenecks caused by the presence of structural or anchoring elements, surface irregularities of the insulating layer or facing material, etc.). To enable the upward movement of the air inside the gap, ventilation openings of adequate size must be put at the bottom and the top, where necessary with protective grates to prevent the entry of foreign bodies. The presence of a ventilated air gap means:1. the evacuation of water vapour coming from inside the building
the heat removal by the upward motion of the air
2. reduction of the heat flow from the outside to the inside of the building.
The corners are formed with a special angle profile made from the same material. The boards should be cut with a grinder with stone grinding disc or with a circular saw with blade with diamond tips. The boards are arranged horizontally and a 2mm joint between them is left. This joint should not be filled with jointfiller. The holes and the milling for the screw heads are made in the factory. The heads of the screw pin fasteners are hidden from the upper row of boards. The visible heads from the first row and from the corner profile should be covered with putty for metal.
 |
 |
| 1. Existing wall (brick, panel etc.); 2. Leveling plaster; 3. YALIPAN board; 4. Screw pin fastener 8/120mm; 5. YALIPAN corner profile | |
 |
 |
| 1. Existing wall (brick, panel etc.); 2. Leveling plaster; 3. YALIPAN board; 4. Screw pin fastener 8/120mm; 5. Glass wool RIVATHERM; 6. YALIPAN corner profile | |
Yalipan wood texture Cementboard Painting
All known paints and painting methods may be used for panels to be used in internal volumes. The paints for panels used in exterior parts or in wet spaces must be alkaline resistant and the panels must be primed.
TYPES OF APPLICATION
A. PRE-SIZED SIDING SYSTEM
TASONIT boards manufactured in standard or customized sizes are drilled and their edges are finished in the factory in advance, and mounted directly on the surface of the existing wall by means of wall plugs. Insulation material can be mounted under TASONIT modules when necessary.
B. REBATED SIDING SYSTEM
The bearing construction is completed by mounting M profiles are on surfaces by means of guiding elements and wall plugs after mounting the thermal isolation boards. After the placement of appropriate system accessories required by the design, TASONIT boards sized according to projects and the edges of which are finished in the factory are screwed on the construction by leaving the necessary recess spaces by means of guiding elements.
C. SIDING SYSTEM WITH RECESSED JOINTS
The bearing construction is completed by mounting M profiles are on surfaces by means of guiding elements and wall plugs after mounting the thermal isolation boards. After the placement of appropriate system accessories required by the design, TASONIT boards sized according to the design, and the edges of which are finished in the factory are screwed on the BETOPANPLUS strips mounted on the bearing construction for creating recessed joints by leaving the necessary recess spaces by means of guiding elements.
Consumption Rates for Yalipan Lambali Wood Texture Facade Cladding without wastages and painting
1. Board Size 175*3000mm – MS hybrid polymer bonding on metal structure
| Product Name | Unitа | Rate |
| Yalipan Lambali cement board 175/3000mm | sq.m. | 1,04 |
| BoardeX CT main supporting facade galvanized profile 50/50/3000mm | m. | 2,00 |
| BoardeX L bracket for СТ main supporting facade profile | pcs. | 3,00 |
| Anchor bolts for concrete / Dowel for brick | pcs. | 6,00 |
| Self Drilling Screw 4,2/19mm | pcs. | 12,00 |
| MS hybrid polymer adhesive 290ml. | cartridge | 0,50 |
2. Board Size 175*3000mm – bonding on heat insulation with MS hybrid polymer
| Product Name | Мярка | Разход |
| Yalipan Lambali cement board 175/3000mm | sq.m. | 1,04 |
| MS hybrid polymer adhesive 290ml. | cartridge | 1,00 |
3. Board Size 175*3000mm – screwing on galvanized profiles
| Product Name | Unit | Rate |
| Yalipan Lambali cement board 175/3000mm | sq.m. | 1,04 |
| BoardeX CT main supporting facade galvanized profile 50/50/3000mm | m. | 2,00 |
| BoardeX L bracket for СТ main supporting facade profile | pcs. | 3,00 |
| Anchor bolts for concrete / Dowel for brick | pcs. | 6,00 |
| Self Drilling Screw 4,2/19mm | бр. | 12,00 |
| Self Drilling Screw 3.5/25mm | pcs. | 12,00 |